Comparative study of various castellated beams with and without stiffeners

Authors

  • shivtej pravin kharade Government College of Engineering Aurangabad

DOI:

https://doi.org/10.3759/rtcet.v9i2.3266

Abstract

use of the castellated beams has its own benefits as its reasonable gives additional strength by almost the same amount of material easily erectable. Studies associated with them demonstrate that quantifiable reduction in the weight of the structure is accomplished by allowing web openings without reducing structural strength or necessities of serviceability. They are made-up by cutting I section in the zigzag design to make shapes like circular hexagonal rectangular and re-joining it by welding both the parts together and increasing its depth ultimately leading to increase its strength. So the strength of I section is improved with the same quantity of material which was necessary for the parent I section. Several types of failure are known, the failure by either the creation of a flexural mechanism by lateral torsion buckling vertical shear failure and formation of vierendeel mechanism shear buckling of a web post and by rupture of welded joints. Based on the various mode of failure the applicable methods of analysis are studied which includes plastic analysis mid post yielding and buckling analysis. Using software like ABAQUS MSc/Nastran and ansus14. Study indicates that use of stiffener in the welded portion decreases the failure as well as increase the strength of the beam

References

B.Anupriya, Dr.K.Jagadeesan. (2014).”Shear Strength Of Castellated Beam With And Without Stiffeners Using FEA (ANSYS 14)”, International Journal of Engineering and Technology (IJET), Volume 6, pp 1970-1981.

Desi Sandy, Richard Frans, et.al. (2017). “Numerical modeling of hexagonal castellated beam under monotonic loading”, Procedia Engineering journal, Volume 171, pp 781 – 788.

Erdal F, Saka M.P. (2013). “Ultimate load carrying capacity of optimally designed steel cellular beams”, Journal of Construct Steel Research, pp 355-68.

Jamadar A. M, Kumbhar P. D. (2015). “Parametric study of castellated beam with circular and diamond shaped openings”, International Research Journal of Engineering and Technology (IRJET), Volume: 02, pp 715-722.

Nikos D. Lagaros, Lemonis D. Psarras, Manolis Papadrakakis, Giannis Panagiotou. (2008). “Optimum Design of Steel Structures with Web Openings”, Engineering Structures Volume 30, pp 2528–2537.

P.D. Pachpor, Dr.N.D. Mittal, et.al. (2011). “Finite Element Analysis and Comparison of Castellated & Cellular Beam”, Advanced Materials Research, Volume 264-265, pp 694-699.

Peijun Wang, Qijie Ma (2014)., “Investigation on Vierendeel mechanism failure of castellated steel beams with fillet corner web openings”, Journal of Engineering Structures, pp 44-51,

Resmi Mohan & Preetha Prabhakaran. (2016). “Finite Element Analysis to Compare the Deflection of Steel Beam with and without Web Openings”, IOSR Journal of Mechanical and Civil Engineering, pp 7-11.

Wakchaure MR, Sagade A.V, “Finite element analysis of castellated steel beam”, International Journal of Engineering Innovative Technology, pp 3744-55, (2012).

Wakchaure MR, Sagade AV, Auti VA, (2012) “Parametric study of castellated beam with varying depth of web opening”, International Journal of Scientific Research Publications, pp 2153-60.

Downloads

Published

2019-08-29

Issue

Vol. 9 No. 2 (2019)

Section

Review Article

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.