Feasibility Study of Reetha Powder (Sapindus trifoliatus) as a Plasticizer Admixture in Concrete
Abstract
With on-going research and development activities in the field of concrete admixtures, emphasis is laid on use of naturally available organic material to enhance properties of concrete. Reetha (Sapindus trifoliatus), is popularly used in ayurvedic medicines such as shampoo and other products because of its excellent foaming and cleansing properties. This study emphasizes on the effect of natural admixtures such as reetha powder concrete (RPC) in comparison with super plasticizers (SPC) and air entraining admixtures (AEC) on various engineering and microscopic properties. The dosages of admixtures were taken as 0.5, 0.8 and 1% by weight of cement for RPC, SPC and AEC concrete. It was observed that RPC gives excellent flow ability and slump however, compressive strength of RPC is reduced by 50% in comparison to SPC and AEC concrete. Hence, study was further extended by reducing dosage of reetha from 0.5 to 0.3% with 0.5% of superplasticizer (R-SP) and compared the results with SPC. It was found that R-SP has 100 mm slump and strength was 31 MPa in comparison to SPC which had 70 mm slump and 36 MPa strength. It is also found in improvement of microscopic properties of concrete over SPC and AEC concrete.
Keywords: Sapindus trifoliatus (Reetha), air entraining admixture, air content, compressive strength
Downloads
Published
Issue
Section
License
Declaration and Copyright Transfer Form
(to be completed by authors)
I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.
- I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
- I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
- I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
- I/We also agree to the authorship of the article in the following order:
Author’s name
1. ________________
2. ________________
3. ________________
4. ________________
| We Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal. |