Potable Water Quality Analysis of Akbarpura, KPK, Pakistan

Authors

  • Arshad Ali National University of Sciences and Technology, Islamabad, Pakistan
  • Amir Ali
  • Muhammad Ullah
  • Jamila Begum

Abstract

In Pakistan, supply of safe drinking water of international standard is very limited. Only around 30% population has access to piped drinking water, which has rarely been completely tested for health safety. About 70% population is drinking water of unknown quality. The only testing comes through human consumption and getting sick. This study is designed to investigate the water quality problems of Akbarpura, Khyber Pukhtunkhwa. Samples were collected from the subject area on continuous basis for a period of 5–6 months. Nearly 240 samples were collected. Analysis of physicochemical parameters has been carried out that includes temperature, pH, electrical conductivity, total dissolved solids, total suspended solids, chloride content, total coliform bacteria, total dissolved solids, nitrates, sulfates and arsenic. The area is adversely affected by the concentration of nitrates and total coliform. The maximum concentration of nitrates was observed at point “D” equal to 112 mg/L. And the same point has a maximum microbial pollution, i.e., 4 MPN/100 mL. The turbidity, TDS and arsenic concentration at all the points were observed to be within the permissible values of WHO guidelines. The point “A” is found to have higher concentration of TDS, i.e., 1240 mg/L, owing to which these samples were found to have bitter taste. Moreover, the concentration of sulfates was also found to be more, i.e., 632 mg/L at point ‘A”. Hence it is recommended that preventive measures must be taken at all points to remove the excess microbial and nitrates contamination and cost-effective methodology should be designed for monitoring of drinking water of the subject area. In this regard, low-cost measures must be applied at a household level for provision of safe drinking water free from any contamination.
Keywords: Total dissolved solids, concentration, total coliform, physiochemical parameters

Downloads

Published

2020-12-14

Issue

Vol. 5 No. 1 (2015)

Section

Articles

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.