Experimental and Behavioral Study on Fly Ash Along with Lime to Make Bricks for Low Cost Housing Techniques

Authors

  • Dr. Ashutosh S. Trivedi Professor, Department of Civil Engineering, IPS College of Technology & Management, Bhopal, Madhya Pradesh- 474001, India. Email: ashnriju[at]rediffmail[dot]com
  • Vinay Garg
  • Sagar Chauhan
  • Ankit Yadav
  • Kuldeep Trivedi
  • Khimesh Singh, Prabal, Manoj Sharma

Keywords:

Soil, fly ash, lime, compressive strength

Abstract

Fly ash is the waste material which is usually dump or used in concrete today as admixture and also replace by cement in concrete proportion and give equivalent strength to structure. A lot of research has been carried out for effective use of fly ash. As we know today fly ash bricks overcame to normal clay burnt bricks in all parameters like compressive strength, water absorption, durability, mortar profit, finishing in brick and compacted. We are making a low cost brick with soil, lime and fly ash. The aim of the present study is to investigate the strength of (soil fly ash bricks) made of lime (L), local soil (S) and fly ash (FA). The experiments were conducted on hand molded (soil fly ash bricks). The study of material used and mould samples make sure about the future use of fly ash + lime + soil and some results give good compressive strength in the molded samples.

Downloads

Published

2020-12-17

Issue

Vol. 5 No. 2 (2015)

Section

Review Article

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.