Open Access Open Access  Restricted Access Subscription or Fee Access

A review on Evaluate the effect of process paramter on mechanical properties 6mm thickness SS317L weld joint for reciever application GTAW welding

Prashant Rameshkumar Pandya, G. D. Acharya

Abstract


TIG welding is most important in the arc welding process. Especially of stainless steel and aluminum are more difficult to do. For better results, the optimal selection of process parameters is very important. In this work, the creator needs to decide the effect of different welding parameters like gas flow rate, current and included angle is selected. The experimental work organizes to optimize different parameter as per ASME section 9. The different test is done to check the quality of weld and strength. And optimization is also done with Minitab software.


Full Text:

PDF

References


Yilmaz, R., Uzun, H. (2002). Mechanical properties of Austenitic stainless steels Welded by GMAW and GTAW. Journal of Marmara of Pure and Applied Sciences, 18(3), 97–113.

A Review on Evaluate the Effect of Process Parameter Pandya and Acharya

TMET (2020) 1–9 © STM Journals 2020. All Rights Reserved Page 8

Ghosh, N., Pal, P.K., Nandi, G. (2018). Investigation on dissimilar welding of AISI 409 ferritic stainless steel to AISI 316L austenitic stainless steel by using grey based Taguchi method. Advances in Materials and Processing Technologies, 4(3), 385–401.

Bharath, P., Sridhar, V.G. (2014). Optimization of 316 stainless steel weld joint characteristics using Taguchi technique. Procedia Engineering, 97, 881–891.

Kumar, S., Shahi, A.S. (2014). On the influence of welding stainless steel on microstructural development and mechanical performance. Materials and Manufacturing Processes, 29(8), 894–902.

Khalifeh, A.R., Dehghan, A., Hajjari, E. (2013). Dissimilar joining of AISI 304L/St37 steels by TIG welding process. Acta Metallurgica Sinica (English Letters), 26(6), 721–727.

Moteshakker, A., Danaee, I., Moeinifar, S., Ashrafi, A. (2016). Hardness and tensile properties of dissimilar welds joints between SAF 2205 and AISI 316L. Science and Technology of Welding and Joining, 21(1), 1–10.

Durgutlu, A. (2004). Experimental investigation of the effect of hydrogen in argon as a shielding gas on TIG welding of austenitic stainless steel. Materials & design, 25(1), 19–23.

Safari, M., Mostaan, H., Derakhshan, E. (2018). Microstructual and mechanical studies of the dissimilar tabular joints of Incoloy alloy 825 and AISI 316 stainless steel. Journal of Marine Engineering & Technology, 1–10.

Kumar, S., Shahi, A.S. (2011). Effect of heat input on the microstructure and mechanical properties of gas tungsten arc welded AISI 304 stainless steel joints. Materials & Design, 32(6), 3617–3623.

Kumar, K.S., Gejendhiran, S., Prasath, M. (2014). Comparative investigation of mechanical properties in GMAW/GTAW for various shielding gas compositions. Materials and Manufacturing Processes, 29(8), 996–1003.

Ahmadi, M., Mirsalehi, S.E. (2015). Investigation on microstructure, mechanical

properties and corrosion behavior of AISI 316L stainless steel to ASTM A335-P11 low alloy steel dissimilar welding joints. Materials at High Temperatures, 32(6), 627–635.

Prabhu, R., Alwarsamy, T. (2017). Effect of process parameters on ferrite number in cladding of 317L stainless steel by pulsed MIG welding. Journal of Mechanical Science and Technology, 31(3), 1341–1347.

Ghosh, N., Pal, P.K., Nandi, G. (2017). GMAW dissimilar welding of AISI 409 ferritic stainless steel to AISI 316L austenitic stainless steel by using AISI 308 filler wire. Engineering science and technology, an international journal, 20(4), 1334–1341.

Buddu, R. K., Chauhan, N., Raole, P.M. (2014). Mechanical properties and microstructural investigations of TIG welded 40 mm and 60 mm thick SS 316L samples for fusion reactor vacuum vessel applications. Fusion Engineering and Design, 89(12), 3149–3158.

Rao, V.A., Deivanathan, R. (2014). Experimental investigation for welding aspects of stainless steel 310 for the process of TIG welding. Procedia Engineering, 97, 902–908.

Moslemi, N., Redzuan, N., Ahmad, N., Hor, T.N. (2015). Effect of current on characteristic for 316 stainless steel welded joint including microstructure and mechanical properties. Procedia CIRP, 26, 560–564.

Dai, H., Shen, X., Wang, H. (2018). The influence of TIG-Arc physical characteristics on the penetration and weld width under different Ar and He supply conditions. Results in Physics, 9, 1120–1126.

Baskoro, A. S., Fauzian, A., Basalamah, H., Kiswanto, G., Winarto, W. (2018). Improving weld penetration by employing of magnetic poles’ configurations to an autogenous tungsten inert gas (TIG) welding. The International Journal of Advanced Manufacturing Technology, 99(5–8), 1603–1613.

Chuaiphan, W., Srijaroenpramong, L. (2019). Optimization of gas tungsten arc

Trends in Mechanical Engineering & Technology

Volume 10, Issue 3

ISSN: 2231-1793 (Online), ISSN: 2347-9965 (Print)

TMET (2020) 1–9 © STM Journals 2020. All Rights Reserved Page 9

welding parameters for the dissimilar welding between AISI 304 and AISI 201 stainless steels. Defence Technology, 15(2), 170–178.

Shukla, A.A., Joshi, V.S., Shukla, B.A. (2018). Analysis of shielded metal arc welding parameter on depth of penetration on AISI 1020 plates using response surface methodology. Procedia Manufacturing, 20, 239–246.

Agrawal, B.P., Chauhan, A K., Kumar, R., Anant, R., Kumar, S. (2017). GTA pulsed current welding of thin sheets of SS304 producing superior quality of joint at high welding speed. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 39(11), 4667–4675.

Kumar, P., Mishra, S., Mishra, R.K., Srivastava, T., Mishra, S., Kumar, R. (2015). Experimental Process of Tungsten Inert Gas Welding of a Stainless-Steel Plate. Materials Today: Proceedings, 2(4–5), 3260–3267.

Lin, C.M., Su, T.L., Wu, K.Y. (2015). Effects of parameter optimization on microstructure and properties of GTAW clad welding on AISI 304L stainless steel using Inconel 52M. The International Journal of Advanced Manufacturing Technology, 79(9–12), 2057–2066.

Gadewar, S.P., Swaminadhan, P., Harkare, M.G., Gawande, S.H. (2010). Experimental investigation of weld characteristics for a single pass TIG welding with SS304. International journal

of engineering science and technology, 2(8), 3676–3686.

Greyjevo, O.G.T.V.Z., Metodo, A.I.T. (2009). Optimization of weld bead geometry in TIG welding process using grey relation analysis and Taguchi method. Materiali in Tehnologije, 43(3), 143–149.

Lu, S.P., Fujii, H., Nogi, K. (2004). Weld shape comparison with iron oxide flux and Ar–O2 shielding gas in gas tungsten arc welding. Science and technology of welding and joining, 9(3), 272–276.

A.S.M.E. Section II A: Boiler, A.S.M.E., Code, P.V. (2019). Section II Materials. Part A–Properties. 28. A.S.M.E. section II C: Boiler, A.S.M.E., Code, P.V. (2010). Section II Material. Part C. Welding Consumables. 29. A.S.M.E. section V: Boiler, A.S.M.E., Code, P.V. (2017). Section V Non-destructive examination.

A.S.M.E. Section IX: Boiler, A.S.M.E., Code, P.V. (2013). Section IX: Welding and Brazing Qualifications




DOI: https://doi.org/10.37591/tmet.v10i3.4206

Refbacks

  • There are currently no refbacks.