Review of Forging Defect and its Remedies

Authors

  • T. Z. Quazi Head, Department of Automobile, Saraswati College of Engineering, Kharghar, Navi Mumbai, India Maharashtra, India
  • Mayuresh M. Naikwade PG Student, Department of Mechanical Engineering, Saraswati College of Engineering, Kharghar, Navi Mumbai, Maharashtra, India

Keywords:

Forging, Flash, forging defects, Unfilling, Forging defects remedies.

Abstract

The objective of this paper is to identify different forging defect that are occurs during forging fora component and also the various forging processes. Initially,someimportantforgingtermsthatarewidelyused in this field are discussed. A detaildescription and classification of forging process and defects given. Design parameters, requirement and proper selection of die material are briefly discussed. Various forging defects which occurs regularly along with their causes and remedies are discussed.Afterthat identify the possible causes of defects like scale, pits,mismatch,lapping through a brainstorming session and , which may have the greatest effect on the forging.Finally,In the paper it is concluded that forging gives quality product than any other processes with implementation of reducing rejection rate through preventive actions.

References

Altan T, Ngaile G, Shen G, editors. Cold and hot forging: fundamentals and applications. ASM international; 2004.

Van Tyne CJ, Walters J. Understanding geometrical forging defects.

Henning HJ. Defects in Hot Forgings. Forging. 2005 Nov;16(6):21-2.

CourseMaterialbyArkeyTechnicalTrainingandResearch Institute, Pune, Maharashtra, India- “Defect analysis and Productivityimprovementinforgingindustries”-October2007.

Rathi MG, Jakhade NA. An Overview of Forging Processes with their defects. International Journal of Scientific and Research Publications. 2014 Jun;4(6):1-7.

Patel BV, Thakkar HR, Mehta SB. Review of analysis on forging defects for quality improvement in forging industries.International Journal of Emerging Technologies and Innovative Research. 2014;1(7):871-5.

Thottungal AP, Sijo MT. Controlling measures to reduce rejection rate due to forging defects. International Journal of Scientific and Research Publications. 2013 Mar;3(3):238-43..

Sekhon MS, Brar DG, Singh DS. A six sigma approach to detect forging defects in a small scale industry: A case study. International Journal of Engineering and Technical Research (IJETR). 2014 Aug;2(8):33-40.

Chand V, Sen SS, Sethi MS. Taguchi analysis of forging defects for gears. International Journal of Advanced Technology in Engineering and Science. 2014;2(8):52-9.

Downloads

Published

2020-10-07

Issue

Vol. 10 No. 2 (2020)

Section

Review Articles

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.