Drilling machine operations and characteristics, including benefits and drawbacks

Authors

  • Shubham Yadav IIT Kanpur,Mechanical Department

DOI:

https://doi.org/10.37591/tmet.v12i2.6657

Keywords:

Keywords, rotary drill, handwheel, Reaming operation, straight Shank, spot facing

Abstract

The drill press's capabilities vary depending on the machine's electronic motor, pillar diameter, spindle nose, travel, speed, and spindle speed. These are widely utilised in the automotive, printing, and engineering industries to improve the machine's consistency and tensile strength while quickly transitioning to resistive materials with high-quality results. Industries that require the mixing and grinding of solid and liquid material frequently use milling cum drilling machines.

Drilling equipment is classified based on kind. The largest drill diameter that a portable drilling machine can handle serves as its primary defining characteristic. The size of the sensitive and upright drilling machines is determined by the largest workpiece that can be centred beneath the spindle.

Most hand-held power tools, including drills, routers, jigsaws, and sanders, employ universal motors.

The drill's workings are really fairly straightforward. An electric motor is started by a trigger switch, and it drives a revolving chuck. The chuck can accommodate a range of accessories, enabling the drill to drive screws, bore holes, sand, polish, and grind a variety of materials.

References

Alekseev V V and Soloviev A S 1997 Automated electric drive of spinner drill machines (Saint-Petersburg: Mining University Published).

Yu Koptev V and Kopteva A V 2017 Developing an Ecological Passport for an Open-Pit Dump Truck to Reduce Negative Effect on Environment IOP Conference Series: Earth and Environmental Science 66.

Zhukovsky A A, Nankin Yu A and Sushinsky V A 1990 Drive and control systems for drilling machines for pits (Moscow: Nedra Publication).

Belsky A A and Sychev Yu A 2016 Conf. Electric Power Quality and Supply Reliability (PQ) (Tallinn: Estonia IEEE Xplore) Active compensation of voltage dips, deviations and distortions in electrical networks with highly variable loads and long lines.

Belsky A A and Dobush V S 2016 unit Dynamics of Systems, Mechanisms and Machines (Dynamics-2016) (Omsk, Russia: IEEE Xplore) Oil well electrical heating facility utilizing heating cable powered by autonomous wind-driven power.

Abramovich B N, Ustinov D A, Sychev Yu A and Shkljarskiy A Y 2014 The methods of voltage dips and distortion compensation in electrical networks of oil production enterprises Oil Industry 8 110-112.

Pawlus W, Hansen M R, Choux M and Hovland G 2016 Mitigation of fatigue damage and vibration severity of electric drivetrains by systematic selection of motion profiles IEEE/ASME Transactions on Mechatronics 21 2870-2880.

Yu Koptev V 2017 Improving machine operation management efficiency via improving the vehicle park structure and using the production operation information IOP Conference Series: Materials Science and Engineering 177.

Zagrivniy E A and Poddubniy D A 2018 A Vibrating Jaw Crusher with Auteresonant Electric Motor Drive of Swinging Movement IOP Conference, Series: Earth and Environmental Science 115.

Bolshunova O M, Kamyshian A and Bolshunov A V 2017 Conference Series: Dynamics of Systems, Mechanisms and Machines, Dynamics (Omsk, Russia: IEEE Explore) Diagnostics of career dump truck traction induction motors technical condition using wavelet analysis.

Downloads

Published

2023-03-24

Issue

Vol. 12 No. 2 (2022)

Section

Review Articles

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.