Open Access Open Access  Restricted Access Subscription or Fee Access

Implications from Molybdenum: Emerging Trend

R. N. Chakraborty, B. Goswami

Abstract


Molybdenum (Mo) is refractory metal to subject high tensile and creep strength, high resistance to heat and corrosion, good thermal diffusivity and satisfactory welding properties. Addition of alloy ingredients lying as Ti, Zr, Si, B, C produce extra additive property evolution to adhere more in accord applicability at high temperature structural items. Fabrication of homogeneous alloy has prepared more adhering to and by powder processing. Extra-in-diffuse thermal involved shock and crack resistance linked towards high temperature usage. Queue assign to form dies towards aerospace disk forge from super-alloys under vacuum. Surface nitride form under stepped state has decisive status to enhance ductile to brittle transition temperature (DTBT). Hf carbide strengthened at elevated temperature under vacuum. Activation by Fe increased evaluation of Mo alloy powder compacts


Keywords


Molybdenum, thermal, creep, refractory, powder

Full Text:

PDF

References


G. Liu, G. J. Zhang, F. Jiang, X. D. Ding, Y. J. Sun, J. Sun and E. Ma, Nanostructured high-strength molybdenum alloys with unprecedented tensile ductility, NATURE MATERIALS; VOL 12; APRIL 2013, 344-350 www.nature.com/naturematerials

T Mrotzek, U Martin and A Hoffmann, High temperature deformation behavior of the molybdenum alloy TZM, 15th International Conference on the Strength of Materials (ICSMA-15)IOP Publishing, Journal of Physics: Conference Series240(2010) 012079doi:10.1088/1742-6596/240/1/012079 2010

Chakraborty SP and Krishnamurthy N, The Preparation of a Molybdenum Based High Temperature Refractory Alloy by Powder Processing Route, J Powder Metall Min 2013, Volume 2 • Issue 3 • 1000113, http://dx.doi.org/10.4172/2168-9806.1000113

Aokui Sun; Yuejun Liu; Dezhi Wang, and Zhihua Zhou; Sintering Behavior and Properties of Mo-Cu Composites; Hindawi Advances in Materials Science and Engineering Volume 2018, Article ID 8703986, 7 pages https://doi.org/10.1155/2018/8703986

A LuoJ.JParkD.LJacobsonB.HTsaoM.LRamalingam; Creep behavior of molybdenum and a molybdenum-hafnium carbide alloy from 1600 to 2100 K; Materials Science and Engineering: A; Volume 177, Issues 1–2, 15 April 1994, Pages 89-94

H. CHOE, J.H. SCHNEIBEL, and R.O. RITCHIE, On the Fracture and Fatigue Properties of Mo-Mo3Si-Mo5SiB2 Refractory Intermetallic Alloys at Ambient to ElevatedTemperatures (258C to 13008C), METALLURGICAL AND MATERIALS TRANSACTIONS A, VOLUME 34A, FEBRUARY 2003—225

Masahiro Nagae, YoshitoTakemoto, Jun Takada, Yutaka Hiraoka and Tetsuo Yoshio, Mechanical Properties of Molybdenum-Titanium Alloys Micro-Structurally Controlled By Multi-Step Internal Nitriding, 15" International Plansee Seminar, Eds. G. Kneringer, P. Rodhammer and H. Wildner, Plansee Holding AG, Reutte (2001), Vol. 1

Chaopeng Cui, YiminGao, Shizhong Wei, Guoshang Zhang, Yucheng Zhou, Kunming Pan, Xiangwei Zhu and SongliangGuo; The Mechanical Properties of the Mo-0.5Ti and Mo-0.1Zr Alloys at Room Temperature and High Temperature Annealing; High Temp. Mater. Proc. 2017; 36(2): 167–173

Tomohiro Takida, Hiroaki Kurishita, Mamoru Mabuchi, Tadashi Igarashi, Yoshiharu Doi and TakekazuNagae; Mechanical Properties of Fine-Grained, Sintered Molybdenum Alloys with Dispersed Particles Developed by Mechanical Alloying; Materials Transactions, Vol. 45, No. 1 (2004) pp. 143 to 148

T. G. Wang, Q. C. Liang &Q. Qin; Microstructure and properties of Mo–Cu alloys produced by powder metallurgy; JournalMaterials Research Innovations Volume 19, 2015 - Issue sup5: Global Conference on Materials Science and Engineering (CMSE 2014)


Refbacks

  • There are currently no refbacks.