Cost Effective Automatic Garage Door Mechanism With Variable Speed
DOI:
https://doi.org/10.37591/joaea.v8i1.5527Keywords:
Automatic garage door, Home Garages, Industrial shutters, VFD, authorized access, higher safety and security, controller, variable working speed, sectional door, overhead door systemAbstract
The aim of our project is to provide safety as well as security to people from the largest electromechanical objects which are available at home. An automatic garage door mechanism was selected as a subject of our research as it is the complex electro-chemical object at home. As technology increases day by day every households installs this automatic garage door mechanism. The major problem with the conventional garage door system was child entrapment and people are in wheelchair are also affected by the conventional garage door mechanism. We are planning to eliminate the problems which are available in the conventional garage door mechanism by providing some extra safety and security features to our automatic garage door mechanism.an automatic garage door mechanism is the combination of mechanical and electrical system in which mechanical system guides the system as well as direct the shutter movement While, electrical system is used to provide energy to mechanical part. Sectional overhead doors have become the standard door type for garages. Our motive behind this study is to increase the safety and security of the automatic garage doors as well as make it to operatable at variable speed. Safety of the equipment is going to be increased by an area presence sensor which will reduce the child entrapment cases. Only authorized people can access the garage, that will increase the security and use of the VFD-variable frequency drive will make the garage door operatable at owner desired working speed. These shutters can be used for home applications as well as industrial applications.References
F.S. Chai. Design of automatic gate mechanism [bachelor’s thesis]. Universiti Malaysia Pahang;
87p.
R.G. Budynas, K.J. Nisbett. Shigley’s Mechanical Engineering Design. 9
th ed. New Delhi:
McGraw Hill Higher Education; 2011.
Navya MR, Ramachandran P. Development of secured home automation using social networking
sites. Indian Journal of Science and Technology. 2015;8(20):1-6.
Balasubramanian K, Cellatoglu A. Analysis of remote control techniques employed in home
automation and security systems. IEEE Transactions on Consumer Electronics. 2009;55(3):
-7.
Garage door remote system with alert feature, by C.A. Redden. (2013, February 12). Patent
US8373555 B1 [Online]. Available: http://www.google.com/patents/US8373555 [January 30,
.
R.J. Schonberger. World class manufacturing: the next decade: building power, strength, and
value: Simon and Schuster. New York:The Free Press;2010.
Hwang IK, Baek JW. Wireless access monitoring and control system based on digital door lock.
IEEE Transactions on Consumer Electronics. 2007;53(4):1724-30.
Shoewu O, Baruwa OT. Design of a microprocessor based automatic gate. The Pacific Journal of
Science and Technology. 2006;7(1):31-44.
Adewuyi PA, Okelola MO, Jemilehin AO. PIC based model of an intelligent gate controller.
International Journal of Engineering and Advanced Technology. 2013;2(3):601-5.
Gill K, Yang SH, Yao F, et al. A zigbee-based home automation system. IEEE Transactions on
consumer Electronics. 2009;55(2):422-30.
Zungeru AM, Abraham-Attah PO. A Digital Automatic Sliding Door with a Room Light Control
System. arXiv preprint arXiv:1303.1728. 2013.
Hwang IK, Baek JW. Wireless access monitoring and control system based on digital door lock.
IEEE Transactions on Consumer Electronics. 2007;53(4):1724-30.
Yoon DH, Chen L, Seo KH, Yoon JU, Yoon JH. Home control system with the mobile. In 2009
Fifth International Joint Conference on INC, IMS and IDC. IEEE.2009:1317-1320.
Downloads
Published
Issue
Section
License
Declaration and Copyright Transfer Form
(to be completed by authors)
I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.
- I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
- I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
- I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
- I/We also agree to the authorship of the article in the following order:
Author’s name
1. ________________
2. ________________
3. ________________
4. ________________
| We Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal. |