Open Access Open Access  Restricted Access Subscription or Fee Access

Low cost method for fuel production from Plastic waste

Savitha K.U

Abstract


There is a huge problem of plastic waste remaining bulbous, eventhough many solutions are put forth. The production of synthetic plastic has reached 400 million tons worldwide, from which 50% is thrown in landfills or recycled; 15 million tons reach seas and oceans.Inceneration and other waste management methods have many limitations, which includes hazards of secondary pollutants. And moreover, there is no more land filling space for waste accumulation. Land filling contaminates soil and water, and also affects wildlife. Hence,this study focuses on combining several synthetic polymer matrices of waste plastics with palm oil and testing it to blend with diesel.  There are several studies on fuel generation from plastic waste pyrolysis, and the novelty of the current work lies in the lowering the cost.  Here complete pyrolysis is not done, but controlled heating in nitrogen atmosphere. The liberation of gas is minimized by use of palm oil which act a solvent medium for some volatile organics.The flash point and fire point of the resultant fuel was very high when compared to desiel. The calorific value was 39,423.3132KJ/Kg which was a comparable with other biodiesels. Sulphur content was 20 ppm for pyrolysis liquid which increased on blending. After SIMDIST GC analysis it was concluded that there lies potentiality to process pyrolysis liquid from plastics

Full Text:

PDF

References


Erdogan, S. Recycling ofWaste Plastics into Pyrolytic Fuels and Their Use in IC Engines. In Sustainable Mobility; Intech Open:London, UK, 2020; pp. 78–90.

Farag, M.; Korachy, A. Plastics Value Chain Mapping and Assessment Technical Report No. 20, USAIDS StrengtheningEntrepreneurship and Enterprise Development (SEED). 2017.

Gnansounou, E.; Raman, J. Hotspot Environmental Assessment of Biofuels. In Biomass, Biofuels, Biochemicals, Biofuels: Alternative Feedstocks and Conversion Processes for the Production of Liquid and Gaseous Biofuels, 2nd ed.; Academic Press: Cambridge, MA, USA 2019; pp. 141–162.

Syamsiro, M.; Saptoadi, H.; Norsujianto, T.; Noviasri, P.; Cheng, S.; Alimuddin, Z.; Yoshikawa, K. Fuel Oil Production from municipal Plastic Wastes in Sequential Pyrolysis and Catalytic Reforming Reactors. Energy Procedia2014, 47, Pp180–188.

Salvilla, N.V.; Ofrasio, B.I.G.; Rollon, A.P.; Manegdeg, F.G.; Abarca, R.R.M.; de Luna, M.D.G. Synergistic co-pyrolysıs of polyolefinplastics with wood and agricultural wastes for biofuel production. Appl. Energy 2020, 279, 115668.

Patni, N.; Shah, P.; Agarwal, S.;Egypt, $ 6.8 Billion 2019 Imported Fuel Bill 2019.

Das, Pallab, and Pankaj Tiwari. "The effect of slow pyrolysis on the conversion of packaging waste plastics (PE and PP) into fuel." Waste Management 79 (2018): 615-624.

Sarker, M, Rashid, MM Molla, M. Waste plastic converting into hydrocarbon fuel materials; 2011, pp. 1–8.

Passamonti FJ, Sedran U. Recycling of waste plastics into fuels. LDPE conversionin FCC. ApplCatal B: Environ 2012;125:499–506.

Owen NA, Inderwildi OR, King DA. The status of conventional world oilreserves; Hype or cause for concern? Energy Policy 2010;38(8):4743–9.

Shafiee S, Topal E. When will fossil fuel reserves be diminished? Energy Policy2009;37(1):181–9.

Panda AK, Singh RK, Mishra DK. Thermolysis of waste plastics to liquid fuel: Asuitable method for plastic waste management and manufacture of valueadded products-A world prospective. Renew Sustain Energy Rev 2010;14(1):233–48.

Ding W, Liang J, Anderson LL. Hydrocracking and hydroisomerization of highdensity polyethylene and waste plastic over zeolite and silica–alumina-supportedNi and Ni-Mo sulfides. Energy Fuels 1997;11(6):1219–24.

Kumar S, Prakash R, Murugan S, Singh RK. Performance and emission analysis of blends of waste plastic oil obtained by catalytic pyrolysis of waste HDPE with diesel in a CI engine. Energy Convers Manag 2013;74:323–31.

BelgiornoV De Feo G, Della Rocca C, Napoli RMA. Energy from gasification ofsolid wastes. Waste Manag 2003;23(1):1–15.

Singh RP, Tyagi VV, Allen T, Ibrahim MH, Kothari R. An overview for exploring the possibilities of energy generation from municipal solid waste (MSW) in Indian scenario. Renew Sustain Energy Rev 2011;15(9):4797–808.

Beltrame PL, Carniti P, Audisio G, Bertini F. Catalytic degradation of polymers: Part II-Degradation of polyethylene. Polymer Degrad Stab 1989;26(3):209–20.

Sarker M, Kabir A, Rashid MM, Molla M, Mohammad ASMD. Waste polyethyleneterephthalate (PETE-1) conversion into liquid fuel. J Fundam RenewEnergy Appl 2011;1:1–5

Sarker M, Kabir A, Rashid MM, Molla M, Mohammad ASMD. Waste polyethylene terephthalate (PETE-1) conversion into liquid fuel. J FundamRenewEnergyAppl 2011;1:1–5.

Al-Salem SM, Papageorgiou LG, Lettieri P. Techno-economic assessment ofthermo-chemical treatment (TCT) units in the Greater London area. ChemEngJ 2014;248: 253–63.




DOI: https://doi.org/10.37591/joaest.v12i3.6306

Refbacks

  • There are currently no refbacks.


Copyright (c) 2022 Journal of Alternate Energy Sources and Technologies