Open Access Open Access  Restricted Access Subscription or Fee Access

Implications of WC–cobalt Composed Forms Matrix

B. Goswami, T. K. Pathak

Abstract


This article summarizes some forms of tungsten carbide in metals under composition. Accumulated ceramic and metal powders produce cement carbide (CC). Systems in these categories are used to manufacture resistive equipment. Cementation method of tungsten carbide is a metallic manner. CC mine drills are applied for any corrosion resistant purposes. Common matrix metals are Co, Ni, Cu, Al, etc. The performance fault from heat-treated assisted oxidation was assessed by the shape annulus range used in the oil drill flow structure. Heat-treatment of cemented carbide involves stabilizing the Co matrix after dissolution of W and C. Therefore, WC re-stabilized in co-cemented carbide in services. The spray technique is of major importance regarding the preparation of cemented carbide surface coat, especially on steel components.


Keywords


WC, Cobalt, Cementation, Ceramic, Composite, Dislodge

Full Text:

PDF

References


RavinderKataria, Ravi Pratap Singh, and Jatinder Kumar, An experimental study on ultrasonic machining of Tungsten carbide-cobalt composite materials, AIMS Materials Science, 3(4): 1391-1409.

Roman S. Khmyrov, Alexandr P. Shevchukov, Andrey V. Gusarov, and Tatyana V. Tarasova, Phase composition and microstructure of WC–Co alloys obtainedby selective laser melting, Mechanics & Industry, 18, 714 (2017)

SiddharthSuhasRevankar, Ramesh, S Rao, Y. S Varadarajan, Study of Tungsten Carbide Behavior in Hot Forging Application, International Journal of Innovative Research in Advanced Engineering (IJIRAE) ISSN: 2349-2163Issue 04, Volume 4(April 2017)

Ahsan Ali Khan, AKM Mohiuddin, NorainnatulHusnaNorhamzan, A Comparative Study on Flank Wear of Ceramic and Tungsten Carbide Inserts during High Speed machining of Stainless Steel, International Journal of Applied Engineering Research ISSN 0973-4562 Volume 13, Number 5 (2018) pp. 2541-2544

C. Bagnall, J. Capo & W. J. Moorhead; Oxidation Behavior of Tungsten Carbide-6% Cobalt Cemented Carbide; Metallography, Microstructure, and Analysis volume 7, pages661–679(2018)

Ayhan EROL, Muzaffer ERDOĞAN, Ahmet YÖNETKEN; WC-CO Based Scratch Tools Production and Characterization for Brick Factory; GU J Sci 26(4): 591-596 (2013)

Zhongnan Xiang,Zhanjiang Li,Fa Chang, andPinqiang Dai;Effect of Heat Treatment on the Microstructure and Properties of Ultrafine WC–Co Cemented Carbide; Metals; Volume 9; Issue 12; 10.3390/met9121302

Wilson Acchar; CordtZollfrank; Peter GreilII; Microstructure and mechanical properties of WC-Co reinforced with NbC; Mat. Res. vol.7 no.3 São Carlos July/Sept. 2004, http://dx.doi.org/10.1590/S1516-14392004000300012

Nieto, A., Jiang, L., Kim, J. et al. Synthesis and Multi Scale TribologicalBehavior of WC-Co/NanodiamondNanocomposites. Sci Rep 7, 7060 (2017).https://doi.org/10.1038/s41598-017-07324-3

Landová M., Brezinová J; Determination of selected properties and fracture toughness of HVOF coatings; Koroze a ochranamateriálu 60(5) 148-153 (2016)


Refbacks

  • There are currently no refbacks.