Open Access Open Access  Restricted Access Subscription or Fee Access

Analysis of Nugget Diameter in Resistance Spot Welding

RONAK NARENDRABHAI SANGHANI, Hardik P. Hindocha, Milan Patadiya, Rajdeepsinh Zala, Rushang Surani

Abstract


In a manufacturing industry, there are many operations performed on daily basis which may be automatic or manual. Welding is one of them specifically spot welding which is nowadays an inevitable part of manufacturing industry and specifically an industry which is manufacturing parts from sheet metal. This industry requires high production machines with higher reliability. Basically, in spot welding there is no need of skilled labor in small industry and only factor which must be considered is the skill of setting up initial setup of machine for welding the specific part. Now this is not something which deals with setting up the jigs and fixtures because this is manual machine and setup means setting up different welding parameters according to requirement of material of part.


Full Text:

PDF

References


Valera J, Miguel V, Martinez A, Naranjo J, Canas M. Optimization of electrical parameters in resistance spot welding of dissimilar joints of micro alloyed steels trip sheets, Science Direct, Procedia Manuf. 13: 2017; 291–298p.

Feng Chen, Tong GQ, Zhenwu Ma, Xiao Kang Yue, The effects of welding parameters on the small scale resistance spot weldability of ti-1al-1mnthin foils. Sci Direct. 2016. doi: 10.1016/j.matdes.2016.04.001.

Dorribo D, Greve L, Diez P, Arias I, Larrayoz-Izcara, Numerical estimation of the bearing capacity of resistance spot weld in martensitic boron steel using j-integral fracture criterion. Theor Appl Fract Mech.

Zhen Luo, Fuyu Yan, Yang Li, Yang Bai, Qi Yao, Hui Tan, Numerical and

experimental study on nugget formation process in resistance spot welding of aluminium alloy. doi: 10.1007/s12209-015-2356-5.

Manladan SM, Yusof F, Ramesh S, Fadzil M, Luo Z, Ao S. A review on resistance spot welding of aluminium alloy. doi: 10.1007/s00170-016-9225-9.

Young-Gon Kim, Bum-Ji Jo, Ji-Sun Kim, In-Ju Kim, A study on dissimilar welding of aluminium alloy and advanced high strength steel by spot welding process. doi: 10.1007/s12541-017-0015-6.

Ingo Boersch, Uwe Fussel, Christoph Gresch, Christoph Grobmann, Benjamin Hoffmann, Data mining in resistance spot welding. doi: 10.1007/s00170-016-9847-y.

Cameron Summerville, David Adams, Paul Campston, Matthew Doolan, Nugget diameter in resistance spot welding: a comparison between a dynamic resistance based approach and ultrasound c-scan. Procedia Eng. 183: 2017; 257–263p.

Neugebuer R, Wiener T, Zosch A. Quality control of resistance spot welding of high strength steels. Procedia CIRP. 12: 2013; 139–144p.

LI-Ru Xiaonga, Quality monitoring of resistance spot welding based on process parameters. Energy Procedia. 14: 2012; 925–930p.

Ding Min, Liu Shi-Sheng, Hao Hong, Peng Tao, Zhang Pei-Lei, Strength and infrared assessment of spot welded sheets on ferrite steel. Mater Design. 52: 2013; 353–358p.

Dariusz Ulbrich, Jakub Kowalczyk, Marian Josko, Jaroslow Selech, The analysis of spot welding joints of steel sheets with closed profile with ultrasonic method. Case Stud Non-Destructive Test Evaluat. 4: 2015; 8–14p.




DOI: https://doi.org/10.37591/joprm.v8i3.1444

Refbacks

  • There are currently no refbacks.