| Issue | Title | |
| Vol 2, No 2 (2015) | Characterization of Fly-Ash and Cold Setting Resin Powder Compacts | Abstract |
| Subas Mishra, S. Kumar, A. Pattanaik | ||
| Vol 4, No 1 (2017) | Combined Effect of Welding Speed and Tool Pin Profiles on Tensile properties of FSWAA6061-T6 Joint | Abstract |
| Satyam Patel, H. N. Shah | ||
| Vol 6, No 1 (2019) | Comparative studies of Oxidation and hot corrosion behaviors of uncoated and detonation gun sprayed Cr3C2-25NiCr coating on SA-213 boiler steel at 8000C | Abstract |
| anil kumar | ||
| Vol 10, No 1 (2023) | Complex-hole Polishing Combining Abrasive Gels and Abrasive Flow Machining | Abstract |
| Rishikesh Tiwari | ||
| Vol 8, No 2 (2021) | Corrosion Inhibition Effect of 1-(4-Methoxy-phenyl)-3-(5-phenyl-1,3,4-oxadiazol-2-yl) propan-1-one Inhibitor for Mild Steel in 1 M HCl Solution | Abstract |
| Pruthviraj R.D. | ||
| Vol 6, No 2 (2019) | Corrosion inhibitors of steel applicable by green but toxics | Abstract |
| Bangshidhar Goswami, Kalpana Mahato | ||
| Vol 5, No 3 (2018) | Current status of reinforced thermal spray coatings to increase corrosion resistance of boiler tube steels | Abstract |
| sandeep kumar, rakesh bhatia, hazoor singh | ||
| Vol 2, No 1 (2015) | Deposition of Antimony Trioxide on the Composite Surface to Increase Its Flame Retardancy | Abstract |
| Ali I. Al-Mosawi | ||
| Vol 4, No 2 (2017) | Design and Analysis of Different Welding Joints | Abstract |
| Sashikant Singha, Trilok Chauhan | ||
| Vol 2, No 2 (2015) | Design and Analysis of Water Based Core Technology for a Casting of Light Weight Alloys: Core Casting | Abstract |
| Vijaykumar Arvindbhai Radadiya, Komal G. Dave | ||
| Vol 3, No 1 (2016) | Detailed Study On Physical Properties Of Silicon Nitride Films Deposited By Plasma Enhanced Chemical Vapour Deposition System | Abstract |
| S. R. Yadhuraj, M. N. Talwar, T. K. Subramanyam | ||
| Vol 5, No 1 (2018) | Determination of the optimum conditions for salt bath ferritic Nitrocarburizing process of AISI 1018 Steel using ANOVA method. | Abstract |
| Jagdeep Sharma, Balwinder Singh Sidhu, Rajesh Gupta | ||
| Vol 2, No 3 (2015) | Determining the Effect of Cutting Parameters on Surface Roughness in Turning Process Using the Taguchi Method | Abstract |
| Basil Thankachan, Gracious George, Pranav S, Amal Chandy | ||
| Vol 8, No 1 (2021) | Development of 100% Biodegradable Sanitary Napkin from Pineapple Leaf Fiber with Antimicrobial Properties | Abstract |
| Sandhra Ganesh, Syam Gopal, Sourav S Anand, Premjith M P, Sindhu N | ||
| Vol 3, No 2 (2016) | Development of Mathematical Model for Tool Wear Rate Using 3-Level Response Surface Methodology | Abstract |
| Deepak Kumar Kushwaha, Tilak D Sonani | ||
| Vol 2, No 3 (2015) | Development of Primer as a Value Added Product from Waste PET | Abstract |
| Shashank Mhaske, Aarti P More | ||
| Vol 10, No 2 (2023) | Development of PU/Graphene Anticorrosion/antifriction coatings | Abstract |
| Remya Balakrishnan, Monisha Kanjuchirayil, Nallaperumal Agasthialingom Meenakshi Sundary | ||
| Vol 10, No 3 (2023) | Digital Manufacturing Practices using 3D Printing in Indian Manufacturing Sector to Improve Productivity in Alignment with Industry 4.0 | Abstract |
| Yogeshrao Y. More | ||
| Vol 5, No 2 (2018) | Dissimilar Joining Of Aluminium Alloy to Copper Using Tungsten Inert Gas Welding Process | Abstract |
| Krishna P. Yagati, Naina Elizabeth Sebastian, Anjana Venu, Tom Jose Jose, Tony Saji, Sherin Thampi | ||
| Vol 6, No 3 (2019) | Educational Review on the Applications of Diamond-Like Carbon Films in Fluid Engineering | Abstract |
| Subhadeep Mukhopadhyay | ||
| Vol 10, No 2 (2023) | Effect of Annealing Temperature on the Structural, Morphological and Electrochemical Properties of Ruthenium Oxide Electrodes | Abstract |
| P S Joshi, S S Siddul, D S Sutrave | ||
| Vol 10, No 2 (2023) | Effect of Annealling on Optical Band Gap of Fe2O3 Thin Films on Amorphos Transparent Glass Substrate by Spray Pyrolysis Method | Abstract |
| M. K. Rahangale, Lalitkumar M. Shanware | ||
| Vol 4, No 2 (2017) | Effect of Dry Carbon Fibers on the Mechanical Properties of G801 Carbon Fiber Reinforced Composites | Abstract |
| Yashaswi Khandelwal, Santosh Kumar Panda | ||
| Vol 3, No 1 (2016) | Effect of Mould Cavity Thickness on Cooling Rate of Aluminium with Temperature Dependent Properties | Abstract |
| Shubhi Yadav, Jitendra Jayant | ||
| Vol 5, No 3 (2018) | Effect of Process Parameters on TIG Weld-Brazing of Aluminum Alloy to Galvanized Steel | Abstract |
| Krishna P. Yagati, Shibin A V, Jobin Joseph, Pablo S Ezhuparayil, Sherin Thampi, Tony Chacko | ||
| 26 - 50 of 136 Items | << < 1 2 3 4 5 6 > >> | |