Design of Gear Tooth Rounding and Chamfering Machine

Authors

  • Prabhudev Mallapur Assistant Professor
  • Shiva Krishna J.
  • Umesh Hosmani
  • Krishnaraja Kodancha

DOI:

https://doi.org/10.37591/tmd.v4i3.191

Keywords:

Gear tooth rounding/chamfering, headstock, spindle, machine layout

Abstract

All movable gears which mesh with another gear require either rounding or chamfering. The operation is generally applied to the teeth of spur gears for use in sliding gear transmission of automotive vehicles and machine tool Gear boxes where the gears are moved on their longitudinal axes meshing with another spur gear. In current scenario the mechanically operated machines require lot of settings, which is time consuming and requires one or two trial runs before production takes place. CNC machines are also available to carry out chamfering/rounding process but are expensive than traditional approach. The objective is to remove all these hassles and make a machine affordable and adjusted easily to manufacturers. The design of gear tooth rounding/chamfering machine has been presented in the paper. Necessary design calculations are performed and the layout of the machine is proposed.

Cite this Article
Prabhudev Mallapur, Shiva Krishna J, Umesh Hosmani et al. Design of Gear
Tooth Rounding and Chamfering Machine. Trends in Machine Design. 2017; 4(3): 38–44p.


Author Biographies

Prabhudev Mallapur, Assistant Professor

Department of Mechanical Engineering, Agnel Institute of Technology and design, Goa, India

Shiva Krishna J.

Department of Mechanical Engineering, Agnel Institute of Technology and design, Goa, India

Umesh Hosmani

School of Mechanical Engineering, KLE Technological University, Hubballi, Karnataka, India

Krishnaraja Kodancha

School of Mechanical Engineering, KLE Technological University, Hubballi, Karnataka, India

Downloads

Published

2018-01-09

Issue

Vol. 4 No. 3 (2017)

Section

Articles

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.