Workability Behavior of Copper–Tungsten and Graphite Composites
Abstract
Workability is a measure of deformation that powder metallurgy materials can withstand prior to fracture occurring in the formation or upsetting process. Nowadays, copper-based sintered composites produced by powder metallurgy processes are widely used in bearings and bushes. Also composites based on copper–tungsten (Cu–W) composite containing a solid lubricant (Graphite) have been developed as self-lubricating materials under the conditions of load, atmosphere and temperature. However, it should be noted that the addition of W has an adverse effect on the composites mechanical properties. In this paper the workability behavior of Cu reinforced with W and Gr composite was studied. Gr is a solid lubricant which is used to reduce friction. The various proportions of copper and tungsten powders are mixed with respect to different weight percentage (Pure Cu with 5% Gr, 90% Cu & 5% W with 5% Gr, 85% Cu & 10% W with 5% Gr) and specimen were prepared. The microstructures of the sintered specimens were examined. The compressibility test was conducted using Universal Testing Machine (UTM). The preparation and characterization are clearly discussed in this paper.
Keywords: Workability, Formability Stress Index, Metal Matrix Composites (MMCs), powder metallurgy, relative density.
Published
Issue
Section
License
Declaration and Copyright Transfer Form
(to be completed by authors)
I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.
- I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
- I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
- I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
- I/We also agree to the authorship of the article in the following order:
Author’s name
1. ________________
2. ________________
3. ________________
4. ________________
| We Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal. |