Gas Foil Bearings (GFBs) With Different Bump Foil Materials
Keywords:
Gas foil bearings, Static analysis, Steady state load capacity, foil compliance coefficient.Abstract
There is a significant attention on GFBs in recent times owing to its oil free technology and suitability over a wide arrays of operating conditions. However GFBs have considerably low load carrying capacity as compared to a normal gas bearings (GBs). The present paper investigated the static analysis and comparison of the load capacity of the bump-type GFBs for a simple foil configuration considering only deflection of bump foils. Different foil materials has been inspected in view of comparing the steady state load capacity. Also the variations of GFBs load performance with respect to the compliance of the foil have been reviewed.
Keywords: Gas foil bearings, Static analysis, Steady state load capacity, foil compliance coefficient.
Published
Issue
Section
License
Declaration and Copyright Transfer Form
(to be completed by authors)
I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.
- I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
- I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
- I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
- I/We also agree to the authorship of the article in the following order:
Author’s name
1. ________________
2. ________________
3. ________________
4. ________________
| We Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal. |