Vibration Analysis of Circular Tile Cutter
Abstract
Circular annular cutters with uniform radial cracks are extensively used in the cutting processes. Unwanted noise, vibration and accidental failure associated with the cutting process have become an important economic and technological problem in the industry. The knowledge of natural frequencies of components is of great interest in the study of response of structures to various excitations. Hence, it is important to study a circular plate cutter with central hole, which fixed at inner edge and free at outer edge with its dynamic response. In this study, some efforts are taken for analyzing vibration characteristics of annular disk cutter used in tile cutting industries with free boundary condition but having different (numbers of cutting teeth’s, aspect ratio, effect of different cracks and holes, variable radial slit, circular concentric slit). From the FFT experimentation and FEM validation results, it is found that this study is needful for design data preparation. Secondarily, modal analysis is one of the better tools for finding vibration characteristics for such components. Thus, theoretical and experimental results obtained are to be compared.
Keywords: Circular tile cutter, aspect ratio, teeth’s, radial slit, circular concentric slit, diff. slots, vibration, FFT, FEM
Cite this Article
Hirave Sunil H. Vibration Analysis of Circular Tile Cutter. Trends in Machine Design. 2015; 2(2): 22–25p.
Published
Issue
Section
License
Declaration and Copyright Transfer Form
(to be completed by authors)
I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.
- I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
- I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
- I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
- I/We also agree to the authorship of the article in the following order:
Author’s name
1. ________________
2. ________________
3. ________________
4. ________________
| We Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal. |