Design and Development of Multistep Boring Tool
Keywords:
Boring operation, Cutting tool, cutting force, FEA analysisAbstract
Boring is the process to enlarge the diameter of hole or employed for finishing operation in machine shop. It is a process in which drilled hole, casting hole, forged hole diameter are increased by cutting device known as boring tool. Boring operation is generally conducted to enlarge the hole’s diameter. Spindle speed, cutting speed, feed rate and torque are very important parameters to be considered while designing the boring tool. The effects of spindle speed on boring tool are calculated for designing multiple step boring tool. The values of cutting speed, material removal rate (MRR) are also calculated for different spindle speed. For different parameters the cutting force and torque are calculated and from these values for particular value of spindle speed and feed rate the mathematical and FEA analysis are done.
Keyword: Boring operation, cutting tool, cutting force, FEA analysis
Cite this Article
Shekhar B. Pandya, Jigneshkumar M. Parmar.Design and development of multistep boring tool.Trends in Machine Design.2015; 2(3): 39–46p.
Published
Issue
Section
License
Declaration and Copyright Transfer Form
(to be completed by authors)
I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.
- I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
- I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
- I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
- I/We also agree to the authorship of the article in the following order:
Author’s name
1. ________________
2. ________________
3. ________________
4. ________________
| We Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal. |