Design of C-Frame for Assembly of Mechanical Power Press
Abstract
The aim is to generate the model for assembly operation known as mechanical press machine. Using the concept of reverse engineering, the C-frame has been designed considering stress distribution, deflection, and design specification. Thus, a reciprocating piston is used which apply force upon component with the help of a special tool mounted on the piston. The optimum objective of this study is to observe the finite element modeling of ‘C’ frame of mechanical power press of 50 tons capacity and to analyze the assembly of press under static condition. Press is made up of a frame, a base plate and resources possible in designing the mechanical presses frame can effect reduction in the cost of the presses. By optimizing the weight of material utilized for the structure an attempt have been done in this direction to decrease the volume of material. So, here we can consider an industrial application. This project consist of minimizing the mass of C-frame type assembly press so, it can be checked in the stress then the material required and finally the thickness of plate.
Keywords: Analysis of assembly press, modeling, reduction in material weight, analysis in static condition
Cite this ArticleH.N. Chauhan, R.G. Vaghela, A.L. Dudhatra et al. Design of C-Frame for Assembly of Mechanical Power Press. Trends in Machine Design. 2016; 3(1): 24–29p.
Published
Issue
Section
License
Declaration and Copyright Transfer Form
(to be completed by authors)
I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.
- I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
- I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
- I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
- I/We also agree to the authorship of the article in the following order:
Author’s name
1. ________________
2. ________________
3. ________________
4. ________________
| We Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal. |