Analysis and Optimization of Disc brake of Motor cycle
Keywords:
disc brakeAbstract
Automobile braking system is one of the most important mechanical devices. The disc brake system is a device for slowing or stopping the rotation of a wheel. To stop the vehicle, friction material in the form of brake pads is forced mechanically, hydraulically, pneumatically or electromagnetically against both sides of the disc. Friction causes the disc brake and attached wheel to slow or stop. Generally, the cost of disc rotor of motor cycle is around 800 to 900 Rs and that of friction pad is around 150 Rs. Here we are taking the data of pulsar 150 and considering that all the retardation is carried out by the front disc brake only. So by keeping the braking torque constant if we reduce the diameter of disc rotor and increase the value of fluid pressure then we can reduce the cost up to 30% and weight of disc assembly up to 44%. Here, we are increasing the pad area, so more heat will absorb and dissipate into the atmosphere. Here, radius of disc is decreased; so for keeping the breaking torque constant we need more brake fluid pressure. According to design data, models of both the disc brakes are created using Pro-e software. And analysis is done in ANSYS 14.5 to compare the results of both the disc brakes. From the analysis we come to know that with new proposed design we can reduce the cost and weight of disc brake without significant amount of temperature rise.
Keywords: Automobile braking system, disc brake, friction pad
Cite this ArticleJadav Chetan T, Rola Lina M. Analysis and optimization of disc brake of motor cycle. Trends in Machine Design.2016; 3(1): 1–23p.
Published
Issue
Section
License
Declaration and Copyright Transfer Form
(to be completed by authors)
I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.
- I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
- I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
- I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
- I/We also agree to the authorship of the article in the following order:
Author’s name
1. ________________
2. ________________
3. ________________
4. ________________
| We Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal. |