Finite Element Analysis of Tool Wear Rate in Electrical Discharge Machining and Comparison with Experimental Results
Keywords:
EDM, TWR, experiment, finite element analysisAbstract
Electrical discharge machining (EDM) is one of the precise non-traditional machining processes in which desired shape is obtained in workpiece using electrical sparks. In EDM, material removal from workpiece and tool takes place by means of successive sparks occurring between them. The tool wear is a critical problem in EDM as the change in tool shape directly affects the final shape of the workpiece. In this paper, finite element analysis of tool wear in electrical discharge machining is carried out for copper tool. The input data required for simulation are taken from experimental details available in existing literature. For energy distribution factor, an empirical formula is used. The simulation results are compared and validated with experimental results which showed good agreement.
Cite this Article Sanghani CR, Acharya GD, K. D. Kothari. Finite Element Analysis of Tool Wear Rate in Electrical Discharge Machining and Comparison with Experimental Results. Trends in Machine Design. 2016; 3(3): 18–22p.
Published
Issue
Section
License
Declaration and Copyright Transfer Form
(to be completed by authors)
I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.
- I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
- I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
- I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
- I/We also agree to the authorship of the article in the following order:
Author’s name
1. ________________
2. ________________
3. ________________
4. ________________
| We Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal. |