Stress Analysis of Variable Thickness FGM Rotating Disks by Element based Material Gradation under Thermomechanical Loading
Keywords:
Functionally graded material (FGM), variable thickness rotating disk, element based gradation, thermoelastic analysisAbstract
The present research work aims to analyze deformation and stresses, induced in functionally graded rotating disks of variable thicknesses. The disks are made of exponential functionally graded material, whose mechanical and physical properties vary in radial direction. Functionally gradation of the properties is achieved by element-based gradation. Uniform as well as variable thickness, namely concave profile, convex profile and linear varying profile rotating disks are analyzed for clamped-free and free-free boundary conditions. Disks are rotating in non-uniform temperature field, due to which thermomechanical elastic stresses induced in the disks. These stresses and resulting deformation, due to centrifugal force and uneven temperature distribution are evaluated and presented. Results obtained show that the deformation and stress fields in a rotating disk under thermomechanical loadings can be controlled by varying the thickness of the disk.
Cite this Article Amit Kumar Thawait, Lakshman Sondhi, Shubhankar Bhowmick, Shubhashis Sanyal. Stress Analysis of Variable Thickness FGM Rotating Disks by Element based Material Gradation under Thermomechanical Loading. Trends in Machine Design. 2016; 3(3): 32–42p.
Published
Issue
Section
License
Declaration and Copyright Transfer Form
(to be completed by authors)
I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.
- I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
- I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
- I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
- I/We also agree to the authorship of the article in the following order:
Author’s name
1. ________________
2. ________________
3. ________________
4. ________________
| We Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal. |