An Experimental Study of Wear and Frictional Behaviour of Different Metal Pairs under Different Normal Loads
Keywords:
Friction coefficient, wear, normal load, aluminium, brass, copper, mild steelAbstract
In the present study, wear and friction coefficients of different material pairs, such as aluminium, brass, copper and steel, are investigated and compared experimentally. In order to do so, a pin-on-disc apparatus is used. Experiments are carried out when different types of pins such as aluminium, brass, copper and mild steel slide on different disc materials such as aluminium, brass, copper and mild steel. Experiments are conducted at normal load of 5, 10, 15 and 20 N, sliding velocity 1 m/s and relative humidity 70%. Variations of wear and friction coefficient at different normal load are investigated. Results show that wear and friction coefficient varies with normal load. The obtained results reveal that friction coefficient increases with the increase in normal load for most of the tested pairs and decreases for others. The magnitudes of friction coefficient are different for different material pairs depending on normal load. Moreover, the wear increases with the increase in normal load for all the tested pairs.
Cite this Article Deependra Singh Patel, Ashesh Tiwari. An Experimental Study of Wear and Frictional Behaviour of Different Metal Pairs under Different Normal Loads. Trends in Machine Design. 2016; 3(3): 23–31p.
Published
Issue
Section
License
Declaration and Copyright Transfer Form
(to be completed by authors)
I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.
- I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
- I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
- I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
- I/We also agree to the authorship of the article in the following order:
Author’s name
1. ________________
2. ________________
3. ________________
4. ________________
| We Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal. |