A Review Report on Metal Expansion Bellows
Keywords:
Expansion joints bellow, thermal expansion joint, EJMA, failure, strengthAbstract
A bellows expansion joint is an assembly of two or more bellows, which helps to tackle expansion or contraction in the system where it is designed to fit in. In the field of expansion joints, very limited literature is available. It was found that various independent researchers did lot of research in the design and geometry of bellows expansion joint but a review of all is rare. All authors have mentioned the reference of standards developed by expansion joints manufacturers’ association (EJMA). Numerous researchers have also conducted studies on bellows expansion joints with the help of ASME standards. Various parameters pertaining to the design of bellows expansion joints, which affect the characteristics of the system, have been reviewed. Different parameters that are responsible for the failure of bellows have also been analyzed and reviewed. Many researchers have worked to improve the strength of bellows. Work of them is being reviewed in this review paper. Certainly, there is still room for new design principles and analysis based on analytical, experimental and FEA studies.
Cite this ArticleParixit Narshana, Jayesh Gohel, Parth Patel et al. A Review Report on Metal Expansion Bellows. Trends in Machine Design. 2017; 4(1): 19–26p.
Published
Issue
Section
License
Declaration and Copyright Transfer Form
(to be completed by authors)
I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.
- I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
- I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
- I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
- I/We also agree to the authorship of the article in the following order:
Author’s name
1. ________________
2. ________________
3. ________________
4. ________________
| We Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal. |