Parametric Optimization of TIG Welding on AISI-304 Stainless Steel Plate by Taguchi based RSM Method
Keywords:
AISI-304, Welding parameters, RSM, Taguchi Method, ANOVAAbstract
The effect of process parameters of TIG welding like the present work focuses the findings of an experimental investigation into the effects of Welding current, Gas flow rate, Electrode diameter, and Root gap on the bead geometry of AISI-304. It is found that the process parameters considered affected the mechanical properties with great extent. Taguchi methodology is used to analyze the effect of each welding process parameters and optimal process parameters which obtained in order to get maximum ultimate tensile strength, Percentage elongation and Hardness of TIG welded AISI 304 stainless steel mainly four input parameter- Welding current, Gas flow rate, Electrode diameter, and Root gap are selected to analyze their effect by changing or varying them. In this study, maximization of response parameters has been identified by using design of experimental methods, Taguchi Analysis and Response surface methodology (RSM). The experiments were conducted using Taguchi’s L16 Orthogonal array in the design of experiment by considering Welding current (WC), Gas flow rate (GFR), Electrode diameter (ED), and Root gap (RG) as welding parameters. The model for the ultimate tensile strength, percentage elongation and hardness, as the function of response parameters, is obtained using the RSM. Finally, the result of developed mathematical model is examined by ANOVA. L16 Orthogonal Array technique is used to formulate the experiment layout and various processes. Conclude that the optimal input parameter setting for ultimate tensile strength, percentage elongation and hardness of TIG welded AISI 304.
Cite this Article.
Dharmendar Singh Yadav, Gaur MK, Pratesh Jayaswal et al. Parametric Optimization of TIG Welding on AISI-304 Stainless Steel Plate by Taguchi based RSM Method. Trends in Machine Design. 2017; 4(2): 30–40p.
Published
Issue
Section
License
Declaration and Copyright Transfer Form
(to be completed by authors)
I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.
- I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
- I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
- I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
- I/We also agree to the authorship of the article in the following order:
Author’s name
1. ________________
2. ________________
3. ________________
4. ________________
| We Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal. |