Mechanical Design and Analysis of a SCO2 Renewable Energy Cycle Expansion Engine
Keywords:
Machine Design, Stress Analysis, Manufacturing, Materials, Renewable EnergyAbstract
The development of renewable energy green technologies continue to challenge the limits on conventional hardware such as engines, compressors, heat exchangers, and generators This paper presents the results of a mechanical design and analysis of an expansion engine to be used as a renewable energy Supercritical Carbon Dioxide (SCO2) low waste heat to energy conversion device. Included in this paper are the results of a detailed mechanical design, stress analysis, finite element analysis (FEA) results, manufacturing bill-of-materials and detailed design drawings of the expansion engine. The hand-calculation stress analysis provides an upper bound of the machine component stresses; 97.8 ksi for the piston writs pin, 26.6 ksi for the connecting rod, 96.4 for the combustion chamber bolts. Fatigue safety factors range from 1.20 to 4.95 for various parts of the expansion engine. The FEA results indicate that the hand-calculation stress analysis results are at least 25% conservative. Manufacturing costs are estimated to be $32K with 88% of the cost Computer Numerical Control (CNC), 89% sand casting, and 3% 3-d printing. Materials selection for the engine’s high temperature environment specifies AIS1 1020 for sand-casted parts, AISI 1045 cold drawn for the CNC fabricated parts. Kinematics analysis suggests that the primary load path will witness 1.8 g’s of rotary acceleration.
Keywords: Machine design, stress analysis, manufacturing, materials, renewable energy
Published
Issue
Section
License
Declaration and Copyright Transfer Form
(to be completed by authors)
I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.
- I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
- I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
- I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
- I/We also agree to the authorship of the article in the following order:
Author’s name
1. ________________
2. ________________
3. ________________
4. ________________
| We Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal. |