A Stress Distribution Model along the Tooth Mating Surface of a Non-Metallic Spur Gear using the Hertz's
Abstract
A low cost cement reinforced polymeric composite material is designed and developed for fabrication of non-metallic automotive components such as gear. 10 wt% cement fillers are mixed up with pure polypropylene and injection-molding process is followed to fabricate the composite gear. Several experiments have been conducted to study the composite gear failure mechanism and resulting stress distribution along the tooth contact surface. For this, experimental data are used and Hertzian contact theorem is used and a theoretical model has been developed that describes the stress distribution along the tooth contact region. The obtained results indicate that maximum stress variation occurs at the mating surface spot while stress concentration varies with the distance away from the contact point.
Keywords: Hertz’s contact theorem, principal stress, composite spur gear, stress distribution.
Published
Issue
Section
License
Declaration and Copyright Transfer Form
(to be completed by authors)
I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.
- I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
- I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
- I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
- I/We also agree to the authorship of the article in the following order:
Author’s name
1. ________________
2. ________________
3. ________________
4. ________________
| We Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal. |