Design and Analysis of Nano-Vibratory Beam Gyroscope
Abstract
This paper presents the modeling and analytical simulation task of a nano cantilever beam gyroscope. Micro/nano gyroscope as an effective rate measurement sensor is of extreme importance in several modern equipments including aircrafts, satellites and even in small cameras. Several types of such gyroscopes are in use and various research simulations were performed over the last one decade. Compared to tuning fork and ring type, the beam type gyroscopes are relatively easy to use and the coupled dynamics can be resolved conveniently. Just like, a resonator, the first step is to know the static pull-in behaviour corresponding to a given geometry. When the time coordinate is absent, it is referred to as static problem. Static pull-in analysis is carried-out by considering the intermolecular and electrostatic forces. Model results are illustrated in the form of graphs.
Keywords: Nano beam gyroscope, static pull behaviour, coupled dynamic equations, damping and intermolecular forces
Cite this Article: Gurjar Ashish Kumar, Srinivas J. Design and Analysis of Nano-Vibratory Beam Gyroscope. Journal of Mechtronics and Automation. 2015; 2(1): 1–7p.
Published
Issue
Section
License
Declaration and Copyright Transfer Form
(to be completed by authors)
I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.
- I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
- I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
- I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
- I/We also agree to the authorship of the article in the following order:
Author’s name
1. ________________
2. ________________
3. ________________
4. ________________
| We Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal. |