Comparison of Existing Experimental Results with Different Types of Simulation Software for Transmission Loss Estimation of Muffler
Abstract
Acoustic Muffler’s characteristics are calculated by Transmission Loss and Insertion Loss. Single expansion chamber is generally used as noise reduction elements in exhaust systems. To quantify its effectiveness, transmission loss is commonly used as a parameter comparing the transmitted with incident sound pressure level. Mufflers are typically arranged along the exhaust pipe as the part of the exhaust system of an internal combustion engine to reduce its noise. Tao and Seybert used the Two-Source method which is based on the transfer matrix approach and compared the result with BEM in which the simple expansion chambers with center inlet pipe and center outlet pipe is used. The FEA results show the transmission loss characteristics of simple expansion chambers are comparable with existing experimental results.
Keywords: Muffler, Transmission Loss, Ricardo Wave, Ansys
Cite this Article
Amit Kumar Gupta, Ashesh Tiwari. Comparison of Existing Experimental Results with Different Types of Simulation Software for Transmission Loss Estimation of Muffler. Trends in Machine Design 2015; 2(1): 17–20p.
Published
Issue
Section
License
Declaration and Copyright Transfer Form
(to be completed by authors)
I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.
- I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
- I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
- I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
- I/We also agree to the authorship of the article in the following order:
Author’s name
1. ________________
2. ________________
3. ________________
4. ________________
| We Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal. |