Design and Analysis of Cantilever Optomechanical Resonator
Abstract
Solar energy harvesting is one of the leading branches of research in the world. Sun is the greatest source of energy on earth. A lot of techniques are developed in order to tap this energy as much as possible. Optomechanical resonance is a very novel approach for achieving this objective. Solar energy is used to heat a cantilever beam which vibrates at its natural frequency. Due to vibration the beam stretches and compresses alternatively. These deformations are transferred to a PZT (lead zirconate titanate) patch which in turn develops voltage. This voltage is used to charge a battery. Thus solar energy is used directly for producing electricity. Various parameters influence the production of this voltage. The dimensions of the cantilever affect the natural frequency. The applied light frequency, intensity, waist radius etc. affect the power input to the system. Also a coating of superior thermal conductivity material leads to a better absorption of the applied heat flux. The thickness of this coating also affects the vibration parameters. Thus all these parameters affect the net functioning of MEMS photocell.
Keywords: Micromechanical resonator, MEMS, solar energy harvesting
Cite this Article
Rhushikesh Ghotkar, Satyabodh Kulkarni. Design and Analysis of Cantilever Optomechanical Resonator. Trends in Machine Design. 2015; 2(1): 21–25p.
Published
Issue
Section
License
Declaration and Copyright Transfer Form
(to be completed by authors)
I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.
- I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
- I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
- I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
- I/We also agree to the authorship of the article in the following order:
Author’s name
1. ________________
2. ________________
3. ________________
4. ________________
| We Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal. |