Development of a Novel Hybrid Precision Positioning Table Utilizing Stepper Motor and Amplified Piezo Actuator
Abstract
This research paper presents a unique actuating method for a single-axis precise positioning system using a combination of stepper motor and amplified piezo actuator (APA). The adopted method is to employ combination of two separate stages one above the other to achieve the precise positioning. The bottom stage uses a stepper motor (SM) coupled to a fine lead screw for coarse positioning stage (CPS). The secondary stage (SS) is mounted on top of it. The main contribution is to develop a close looped system using a laser displacement sensor (LDS) and LabVIEW program to precisely position the table with an accuracy of 5 µm. Fundamental experiments were conducted using a National Instruments (NI) LabVIEW (a windows supported graphical programming language) program to establish that the system is capable of displacement over a long operational range and precise positioning at the same time. In addition, the operational parameter which affects the motion characteristics of the system such as applied voltage was demonstrated. Based on the experimental studies the precise positioning ability of the system was also demonstrated.
Keywords: Amplified piezo actuator, stepper motor, coarse positioning stage, precise positioning stage, LabVIEW
Cite this Article
Dwibedi Subhasankar, Praveen Kumar H N, Gangadharan KV. Development of a novel hybrid precision positioning table utilizing stepper motor and amplified piezo actuator. Trends in Machine Design. 2015; 2(1): 26–33p.
Published
Issue
Section
License
Declaration and Copyright Transfer Form
(to be completed by authors)
I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.
- I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
- I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
- I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
- I/We also agree to the authorship of the article in the following order:
Author’s name
1. ________________
2. ________________
3. ________________
4. ________________
| We Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal. |