A Review on “Optimization of Process Parameters for Honing Process of GG25 Cylinder Liner”

Authors

  • Vatsal K. Joshi
  • Hardik N. Chauhan
  • Akash R. Sadatiya

DOI:

https://doi.org/10.37591/tmd.v4i3.96

Keywords:

Honing machine, methodology, design of experiment

Abstract

Manufacturing processes play requisite role in the market and industries. Stipulation of manufacturing processes has increased now days. Optimization is very essential thing in manufacturing processes. Due to optimization accuracy, productivity can be increased. Honing is a super finishing manufacturing process. Honing provides proficient surface finishing of the cylinder liner. Main purpose of honing is to give prevention against the leakage of oil. So, it can be stated that honing is used for the purpose of oil retention in cylinder liner. Hence utilization of oil is decreased. By optimization of honing process by optimization technique, parameters will be optimized and production rate of GG25 cylinder liner will be increased.


Cite this Article

Joshi Vatsal K, Hardik Chauhan N, Sadatiya Akash R. A Review on “Optimization of Process Parameters for Honing Process of GG25 Cylinder Liner”. Trends in Machine Design. 2017; 4(3): 5–7p.

Author Biographies

Vatsal K. Joshi

Department of Mechanical Engineering, Atmiya Institute of Technology & Science,

Rajkot, Gujrat, India

 

Hardik N. Chauhan

Department of Mechanical Engineering, Atmiya Institute of Technology & Science, Rajkot,  Gujarat, India

Akash R. Sadatiya

Department of Mechanical Engineering, Atmiya Institute of Technology & Science, Rajkot,  Gujarat, India

Downloads

Published

2017-12-15

Issue

Vol. 4 No. 3 (2017)

Section

Articles

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.