Open Access Open Access  Restricted Access Subscription or Fee Access

A Technical review on Solidification cracking behaviour and susceptibility of aluminum alloy weld

Pratik Kikani, Dr. Hemantkumar R. Thakkar

Abstract


The paper deals with the physical, chemical properties along with important aluminum applications. Various defects are generated while welding of aluminum alloys one of the severe defect is cracks. Solidification and liquation cracks are generated at various zones of metals. Different mechanical and metallurgical factors affecting the solidification cracking. A variety of weldability tests like Varestraint test, Transvarestraint test, The Cast Pin Tear test,  Hot Ductility test, Strain-To-Fracture test, Reheat Cracking test, Houldcroft (Fishbone) test are apply to investigate the susceptibility of cracking.

Keywords


Cracking susceptibility; solidification cracking; weldability tests

Full Text:

PDF

References


D. N. Coniglio, Aluminum Alloy Weldability : Identi fi cation of Weld Solidi fi cation Cracking Mechanisms through Novel Experimental Technique and Model Development. 2008.

C. L. Jenney and A. O’Brien, Welding handbook, vol. 1. 1991.

P. Kikani and H. R. Thakkar, “Study of cracking susceptibility in Al alloys welds .,” 2017, no. 1, pp. 50–55.

G. Mathers, “The welding of aluminium and its alloys,” 2002.

Y. P. Yang, P. Dong, J. Zhang, and X. Tian, “A hot-cracking mitigation technique for welding high-strength aluminum alloy,” Weld. J., vol. 79, no. 1, p. 9S–17S, 2000.

Aalco Metals Ltd, “Aluminium alloy Specifications Datasheet,” 2016.

L. A. Aucott, “Mechanism of solidification cracking during welding of high strength steels for subsea linepipe,” no. August 2015, p. 283, 2015.

C. V. Robino, J. R. Michael, and M. C. Maguire, “Solidification and welding metallurgy of galling-resistant stainless steels,” Weld. J. (Miami, Fla), vol. 77, no. 11, pp. 446–457, 1998.

JOHN C. LIPPOLD, WELDING METALLURGY AND WELDABILITY. 2015.

Sindo Kou, Welding Metallurgy, vol. 822, no. 1–3. 2003.

J. C. Lippold, “Recent developments in weldability testing,” Hot Crack. Phenom. Welds=Joining Adv. Spec. Mater. VII, pp. 271–290, 2005.

L. Kolarik, K. Kovanda, M. Valova, P. Vondrous, and J. Dunovsky, “WELDABILITY TEST OF PRECIPITATION ALUMINIUM ALLOY EN AW 6082 T6,” 2011.




DOI: https://doi.org/10.37591/tmet.v8i2.672

Refbacks

  • There are currently no refbacks.