Tribological Behaviour of Epoxy-Marble Powder Composite with Taguchi Optimization Technique
Abstract
Epoxy resin strengthened with marble powder particles is prepared by ultrasonic mixing strategy. Pin-on-Disc wear trial of the developed composite is done concurring with Taguchi optimisation. An orthogonal array is displayed and analysed the affecting parameters like fraction of marble powder reinforcement, load, sliding speed and track diameter on the composite. Signal to noise ratio analysis optimises the parametric conditions that yield minimum wear rate, minimum frictional force and minimum coefficient of friction. ANOVA demonstrates that speed assumes an indispensable part in expanding dry sliding wear of epoxy composites.
Keywords
Full Text:
PDFReferences
K. Mao, P. Langlois, Z. Hu, K. Alharbi, X. Xu, M. Milson, et al., The wear and thermal, mechanical contact behaviour of machine cut polymer gears, Wear 333 (2015) 822–826, doi:10.1016/j.wear.2015.01.084.
A. Routa, A. Satapathy, Analysis of dry sliding wear behaviour of rice husk filled epoxy composites using the design of experiment and ANN, Procedia Eng. 38 (2012) 1218–1232, doi:10.1016/j.proeng.2012.06.153.
L. Deuis, C. Subramanian, M. Yellup, Abrasive wear of aluminium composites – a review,Wear 201 (1996) 132–144.
S. Biswas, A. Satapathy, A study on the tribologicalbehaviour of alumina-filled glass-epoxy composites using Taguchi experimental design, Tribol. Transact. 53 (2010) 520–532, doi:10.1080/10402000903491309.
J.R. Laguna-Camacho, C.A. Marquez-Vera, A.A. Patino-Valdez, G. Juarez-Morales, I. Hernandez-Romero, R.E. Contreras-Bermudez, et al., A study of the erosive wear damage on a recycled polymer coating, Wear 332–333 (2015) 836–843, doi:10.1016/j.wear.2015.01.065.
W. Xu, X.Ma, N. Tang, L. Zhu,W. Li, Y. Ding, Effect of post-welding heat treatment on wear resistance of cast-steel die with surfacing layer, Manuf. Rev. 2 (2015) 25, doi:10.1051/mfreview/2015027.
T.S. Kiran, M. Prasanna Kumar, S. Basavarajappa, B.M. Viswanatha, Dry sliding wear behaviour of heat treated hybrid metal matrix composite using Taguchi techniques, Mater. Des. 63 (2014) 294–304, doi:10.1016/j.matdes.2014.06.007.
A. Pattanaik, M.K. Mohanty, M.P. Sathpathy, Effect of mixing time onmechanical properties of epoxy-fly ash composite, J. Mater. Metall. Eng. 5 (2015) 11–17.
Rashmi, N.M. Renukappa, B. Suresha, R.M. Devarajaiah, K.N. Shivakumar, Dry sliding wear behaviour of organo-modified montmorillonite filled epoxy nanocomposites using Taguchi’s techniques, Mater. Des. 32 (2011) 4528–4536, doi:10.1016/j.matdes.2011.03.028.
A. Satapathy, A. Patnaik, M.K. Pradhan, A study on processing, characterisation and erosion behaviour of fish (Labeo-rohita) scale filled epoxy matrix composites, Mater. Des. 30 (2009) 2359–2371, doi:10.1016/j.matdes.2008.10.033.
Q.Wang, Q. Xue, H. Liu,W. Shen, J. Xu, The effect of particle size of nanometer ZrO2 on the tribological behaviour of PEEK, Wear 198 (1996) 216–219, doi:10.1016/0043-1648(96)07201-8.
B.J. Briscoe, Materials aspects of polymer wear, Scr. Metall. 24 (1990) 839–844.
S.A. Alidokht, A. Abdollah-Zadeh, H. Assadi, Effect of applied load on the dry sliding wear behaviour and the subsurface deformation on hybrid metal matrix composite, Wear 305 (2013) 291–298, doi:10.1016/j.wear.2012.11.043.
J.K. Lancaster, Polymer base bearing materials: the role of fillers and fibre reinforcement, Tribology (1972) 249–255 Ministry of Defence.
A Pattanaik, M P Satpathy, S C Mishra, Dry sliding wear behaviour of fly ash epoxy composite with Taguchi optimization, Engineering Science & Technology, an International Journal, 19 ( 2016) 710-716
S.S. Mahapatra, A. Patnaik, A. Satapathy, Taguchi method applied to the parametric appraisal of erosion behaviour of GF-reinforced polyester composites, Wear 265 (2008) 214–222, doi:10.1016/j.wear.2007.10.001.
S. Biswas, A. Satapathy, Tribo-performance analysis of red mud filled glass-epoxy composites using Taguchi experimental design, Mater. Des. 30 (2009) 2841– 2853, doi:10.1016/j.matdes.2009.01.018.
DOI: https://doi.org/10.37591/tmet.v8i2.988
Refbacks
- There are currently no refbacks.