Establishment of IHTC value of LM 13 and ADC 12 material for sand casting by FEM

Authors

DOI:

https://doi.org/10.37591/tmet.v8i3.862

Keywords:

Sand Casting, IHTC, LM 13, ADC 12, FEM, Inverse Method.

Abstract

Abstract: For making a simple to very complex shaped product, sand casting is an inexpensive, useful and significant process. Throughout the process, Solidification plays an important role for making a sound and defect-less casting which was affected by different parameters like Interfacial Heat Transfer Coefficient, Casting Material & Shape, Mold Material, etc. For quality casting, industries trying to optimize solidification process by various methods. Present study shows the range of IHTC values opted for two different materials (LM 13 and ADC 12) at two altered locations inside the mould using Inverse Method with various simulations were performed to compare the results using designing and simulation software as well as the actual experiments.

Author Biography

  • Shaheen beg mughal, ITM UNIVERSITY GWALIOR
    Assistant Professor Mechanical Engineering Department

References

Campbell JS. Principal of Manufacturing Material and Process. Tata McGraw-Hill Publication; 2004.

Kalpakjain S, Schmid RS. Manufacturing Engineering & Technology. Pearson Education Centre; 2013.

Ravi B. Casting Simulation and Optimization: Benefits, Bottlenecks, and Best Practices. Indian Foundry J. Jan 2008.

Balasko M, Korosi F, Szalay Z. Semi-Simultaneous Application of Neutron and X-Ray Radiography in Revealing the Defects in an Al Casting. App RadiatIsot. 2004; 61(4): 511–515p.

Niyama. Method of Shrinkage Prediction and Its Application to Stell Casting Practice. 49th International Foundry Congress, Chicago. 1982.

Ravi B, Joshi D. Feedability Analysis and Optimization Driven by Casting Simulation. Technical Paper Submitted to the Indian Foundry J. 2007.

Khan S, Ravindran C, Naylor D, et al. Measurement of Interfacial Heat Transfer Coefficient in LFC of A356 Al Alloy. AFS Trans. 2000; 77: 445–452p.

Martorano MA, Capocchi JDT. Heat Transfer Coefficient at the Metal-Mould Interface in the Unidirectional Solidification of Cu-8% Sn Alloys. Int J Heat Mass Transfer. 2000; 43(14): 2541–2552p.

Sachin HM, Kocatepe K, Kayikci R, et al. Determination of Unidirectional Heat Transfer Coefficient during Unsteady State of Solidification at Metal Chill Interface. Energy Converse Manage. 2006; 47(1): 19–34p.

Downloads

Published

2018-08-31

Issue

Vol. 8 No. 3 (2018)

Section

Articles

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.