OPTIMIZATION OF TWO WHEELER ENGINE BLOCK BY VARYING THE ENGINE FIN PROFILES AND MATERIALS

Pallepogu Naveen, Sri. M. Kumara Swamy

Abstract


Here in our thesis we are going to design the fins using different profiles and materials to optimize the better material with better design profile which is suitable for 100cc engine. So here we are even going to use different material for fins to test the engine heat efficiency. In our thesis we are going to compare or product optimized using the original aluminum fins which are being used in the existing. So by comparing the results obtained from the analytical software, the best model is optimized using Ansys software results. Here in this thesis we are going to use four different materials Al 6082, Al 6061, Al + SiC-12 and Al 8011A. and even the fin profiles are also optimized by varying the shape of the fin arrangement. Here for designing the fins on the cylinder block CATIA is used and for the analytical analysis ANSYS is used.


Keywords


ANSYS, ELLIPTICAL GROOVE, Thermal ANALYSIS, ENGINE FIN

Full Text:

 Subscribers Only

References


Naman Sahu, Vishal Gupta, Pradeep Kr. Kurmi; Thermal Analysis of Engine Fins by using FEM: A Review; RESEARCH GATE; IJTIMES; Volume 4, Issue 8, August-

Mulukuntla Vidya Sagar and Nalla Suresh; Thermal Analysis of Engine Cylinder with Fins

by using ANSYS Workbench; International Journal of Engineering Research & Technology (IJERT); Vol. 6 Issue 06, June – 2017.

Pushpandra Kumar Patel, Vikky Kumhar; THERMAL ANALYSIS OF PISTON BLOCK USING FINITE ELEMENT ANALYSIS; IJIRMPS; Volume 6, Issue 5, 2018.

Sachin Kumar Gupta, Harishchandra Thakur, Divyank Dubey; Analyzing Thermal Properties of Engine Cylinder Fins by Varying Slot Size and Material; HCTL Open

International Journal of Technology Innovations and Research (IJTIR); Volume 14, April 2015

Pulkit Sagar, Puneet Teotia, Akash Deep Sahlot, H.C Thakur; Heat transfer analysis and optimization of engine fins of varying surface roughness; material today

proceedings; science direct; Elsevier; (ICAAMM-2016)

Vishnu Dineshan, Patel Pratik, Dhameliya Hiren, Raithatha Raj, Bharat Khalasi; ICONIC RESEARCH AND ENGINEERING JOURNALS; MAR 2019 | IRE Journals

| Volume 2 Issue 9

Shubham patel, Dr. Alka Bani Agrawal; Thermal Analysis of Engine Cylinder Block with Fins using FEM; International Research Journal of Engineering and Technology

(IRJET); Volume: 08 Issue: 12 | Dec 2021

P. Sai Chaitanya, B. Suneela Rani, K. Vijaya Kumar; Thermal Analysis of Engine Cylinder Fin by Varying Its Geometry and Material; Journal of Mechanical and Civil Engineering (IOSR-JMCE) e-ISSN: 2278-1684,p-ISSN: 2320-334X, Volume 11, Issue 6 Ver. I (Nov- Dec. 2014),

https://en.wikipedia.org/wiki/AlSiC




DOI: https://doi.org/10.37591/tmd.v10i2.7473

Refbacks

  • There are currently no refbacks.