A Technical Review on Design of Cupped Spring Washer in Automobile Clutch

Authors

  • Akash Shukla Department of Mechanical Engineering, Vadodara Institute of Engineering, Kotambi, Vadodara, Gujarat Technological University, Vadodara, Gujarat, India
  • Tirth Darji Department of Mechanical Engineering, Vadodara Institute of Engineering, Kotambi, Vadodara, Gujarat Technological University, Vadodara, Gujarat, India
  • Sumit Gupta Department of Mechanical Engineering, Vadodara Institute of Engineering, Kotambi, Vadodara, Gujarat Technological University, Vadodara, Gujarat, India
  • Jeffin Joy Department of Mechanical Engineering, Vadodara Institute of Engineering, Kotambi, Vadodara, Gujarat Technological University, Vadodara, Gujarat, India

DOI:

https://doi.org/10.37591/tmd.v5i1.376

Keywords:

Belleville washer, cupped spring washer, friction plate, elastomer, align clutch

Abstract

In current scenario, in automotive industry, in clutch division, major challenge is to reduce the rattling noise and vibration. Thus most of the industries are adopting the concept of controlling hysteresis by virtue of introducing the cupped washer design in clutch disc assembly. In this project, we will model the cupped washer based on the size and geometry of the clutch, and carry out calculations of load and deflection to achieve the targeted hysteresis of disc assembly by which vibration and rattling noise in running vehicle can be minimized. This technical review paper deals with the study of Belleville spring washer as well as different washers and clutch assembly. This review paper helps in understanding various parameters that are involved in the designing of cupped spring washer. The results of the various researches in same field have been analysed and studied.

Cite this Article Akash Shukla, Tirth Darji, Sumit Gupta, et al. A Technical Review on Design of Cupped Spring Washer in Automobile Clutch. Trends in Machine Design. 2018; 5(1): 1–4p.

Author Biography

  • Akash Shukla, Department of Mechanical Engineering, Vadodara Institute of Engineering, Kotambi, Vadodara, Gujarat Technological University, Vadodara, Gujarat, India

    Department of Mechanical Engineering,

    Vadodara Institute of Engineering, Kotambi, Vadodara,

    Gujarat Technological University, Vadodara–391510, Gujarat, India

Downloads

Published

2018-06-12

Issue

Vol. 5 No. 1 (2018)

Section

Articles

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.