Thermal Analysis and Computer Aided Exhaust Valve Design Automation Using CREO and Microsoft Excel Spreadsheet

Authors

  • Siraj Chabru M.Tech. Student, Department of Mechanical Engineering, Maharashtra Institute of Technology, Aurangabad, Maharashtra, India
  • P. S. Kulkarni Professor, Department of Mechanical Engineering, Maharashtra Institute of Technology, Aurangabad, Maharashtra, India

DOI:

https://doi.org/10.37591/tmd.v8i1.5571

Keywords:

Microsoft Excel, CREO parametric, Ansys, modeling automation, VB for application

Abstract

3D modeling has widely been used because of their ease in visualization, understanding and
generation of manufacturing drawing sheets compared to 2D drafting. 3D Modeling is the timeconsuming
process and many draftsmen does not have the skill to draw a 3D object inside a CAD
packages. Internal combustion engine consists of two type of valves inlet valve and exhaust valve. The
pair of inlet and exhaust valve is called as poppet valves. Exhaust valve is the mechanical object
reputedly required nearly in all internal combustion engines. In this paper we are automate the
exhaust valve design by creating graphical user tool using visual basic programming language inside
the Microsoft excel spreadsheet. This excel spreadsheet is later integrated to CREO database for
automatic 3D valve Modeling. Exhaust valve is the nose of the internal combustion engine to eject the
exhaust gases out form the engine at a time of exhaust stroke. It is continuously come under the high
temperature and pressure. Steady state thermal analysis has been carried out using FEA. To
demonstrate our study, we are considered to design and analysis the exhaust valve for Honda CB
Twister 110cc having chamfer angle of 45 degrees. For the 3D modeling we use CREO and ANSYS
18.0 is used for FEA analysis.

References

Wang SH, Melendez S, Tsai CS. Application of parametric sketching and associability in 3D CAD. Comput Aid Des Appl. 2008;5(6):822–30. doi: 10.3722/cadaps.2008.822–830.

Bedse UA. Developing a GUI based Design Software in VB Environment to Integrate with CREO for Design and Modeling of CI Engine. Int J Latest Trends Eng Technol (IJLTET). 2016;6(4):373–81.

Zheng Y, Chen Z. Parametric design of straight spur gears based on Pro/E. Vol. 2011. Harbin, China: IEEE Publications; 2011 Aug 12–14. p. 4585–4589p.

Thakkar AM, Patel YD. Integration of ProEngineer with Excel and C Language for design automation. Int J Eng Res Technol (IJERT). 2012;1(4):2–4.

Hussein HMA. Computer aided blanking die design using CATIA. Procedia CIRP. 2014;18:96–101. doi: 10.1016/j.procir.2014.06.114.

Fan Q, Liu G, Wang W. Development of die Sets standard parts library based on Pro/E. Procedia Eng. 2011;15:3802–7. doi: 10.1016/j.proeng.2011.08.712.

Shah DB. Parametric modeling and drawing automation for flange coupling using excel spreadsheet. Int J Res Eng Technol Impact J. 2013:187–92.

Gawale SS, Shelke DSN. Diesel engine exhaust valve design and optimization. J Mech Civ Eng. 2016;13(4):85–93. doi: 10.9790/1684–1304048593.

Seralathan S, Raju TN, Venkat IG, et al. Thermal analysis on different exhaust valve materials of compression ignition engine. Mater Today Proc. 2020;33:4105–11.

Witek L. Failure and thermo-mechanical stress analysis of the exhaust valve of diesel engine. Eng Fail Anal. 2016;66:154–65. doi: 10.1016/j.engfailanal.2016.04.022.

Chun KJ, Kim JH, Hong JS. A study of exhaust valve and seat insert wear depending on cycle numbers. Wear. 2007;263(7–12):1147–57. doi: 10.1016/j.wear.2007.02.006.

Chabru SM, Kulkarni PS. Design and analysis of IC engine poppet valve with varied geometrical parameters. Int J Eng Res Technol (IJERT). 2019;8(7):416–9.

Downloads

Published

2021-05-29

Issue

Vol. 8 No. 1 (2021)

Section

Articles

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.