Response Surface analysis to find optimum pull for a Multi-Purpose Agricultural Tool for Design and Fabrication

Authors

  • Shashank Sharma Department of Mechanical and Automobile Engineering, Christ University Faculty of Engineering, Bengaluru-560074, Karnataka, India.
  • Mr Sanjay
  • Samant Jain
  • Pradyoth Reddy Gopireddy
  • Chennakeshava R

DOI:

https://doi.org/10.37591/tmd.v5i2.676

Keywords:

Agriculture, agro-based, analysis, multipurpose, response, surface, tool

Abstract

Design and assembly of a multi-purpose agricultural tool is a major aspect that has to be developed, This is majorly in continuation with the fact that India has shifted its trend from just an agro-based country to homeland of major IT companies, but still one of its major income is through agriculture be it directly or indirectly. So, it’s an obvious concern that India’s agriculture should be modernized. More than a reason it has been an agenda to cut down the cost of machines which are the very first investment of a farmer. A lot of people are working on this but very few of them came up with some effective measures. The current paper concentrates on the response surface analysis to find the optimum pull for a multi – purpose agricultural tool for design and fabrication of a multi – purpose agricultural tool.

 

References

Amol B Rohokale, Pavan D Shewale, Sumit B Pokharkar, Keshav K Sanap. A Review on multiseed sowing machine. International Journal of Mechanical Engineering and Technology. 2014; 5 (2): 180–186p.

Aditya Kawadaskar, Chaudhari SS. Review of methods of seed sowing concept of multi-purpose seed sowing machine. International Journal of Pure and Applied Research in Engineering and Technology. 2013; 1 (8): 267–27p.

Wankhede AA, Rathod AP, Gorde AV, Gondane RK. Design modification of advance seed sowing cum fertilizer machine. International Journal for Engineering Applications and Technology. http://www.ijfeat.org/papers/mech34.pdf?i=1

Muhammed Kashif R, Sharanabasappa Bolashetty, Mohammed Yaseen AH, Bhargavi A. Design and development of semi-automated multipurpose agriculture wheel hoe. project reference no: 38s0026. http://www.kscst.iisc.ernet.in/spp/38_series/spp38s/synopsis_exhibition/208_38S0026.pdf

Humbade AB, Kalingwar CM, Kada. NS, Davargave MM, Lande SB. Multipurpose agriculture vehicle. International Journal of General Science and Engineering Research. 2017; 3 (2): 126–129p.

Sakhale CN, Waghmare SN, Rashmi S Chimote. A review paper on multipurpose farm machine. International Research Journal of Engineering and Technology. 2016; 03 (09): 990–995p.

Martin Vimal VM, Madesh A, Karthick S, Kannan A. Design and fabrication of multipurpose sowing machine. International Journal of Scientific Engineering and Applied Science. 2015; 1 (5): 27–34p.

Kankal US, Karale DS, Khambalkar VP, Thakare SH. Performance evaluation of single row manual cotton planter. International Journal of Agricultural Engineering. 2016; 9 (1): 19–26p.

Kyada AR, Patel DB. Design and development of manually operated seed planter machine. 5th International & 26th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2014), IIT Guwahati, Assam, India. December 12th–14th, 2014.

Kalay Khan, Moses SC, Ashok Kumar. The design and fabrication of a manually operated single row multi-crops planter. IOSR Journal of Agriculture and Veterinary Science. 2015; 8 (10): 147–158p.

Mursec B, Vindis P, Janzekovic M, Cus F, Brus M. Testing of quality of sowing by pneumatic sowing machines. Journal of Achievements in Materials and Manufacturing Engineering. 2008; 26 (1).

Subrata Kr Mandal, Atanu Maity, Ashok Prasad, Palash Kr Maji, Sankar Karmakar. Design & development of a suitable implement matching with low hp tractor. International Research Journal of Engineering and Technology. 2015; 2 (2).

The presentation by Rohan Gandhi, Crop production practices and management. https://www.slideshare.net/deepakkg/crop-procuction-and-management

Patel Bhavik, Patel Chandresh, Patel Jaimin, Patel Drumil. Development of Auto gear Transmission with Use of Magnetic Clutch. Department of Mechanical Engineering, Smt. S.R. Patel College of Engineering, Unjha, India, 2016.

Sheikh Mohd Shahid Mohd Sadik, H A Hussain. Design and fabrication of multipurpose farming machine. IJSART. 2017; 3 (9): 2395–1052p.

Downloads

Published

2018-08-29

Issue

Vol. 5 No. 2 (2018)

Section

Articles

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.